歡迎光臨板框壓濾機-隔膜壓濾機配件生產廠家-陜西華星佳洋裝備制造有限公司官網!
13891481115
推薦產品
聯系我們

陜西華星佳洋裝備制造有限公司

咨詢熱線

聯系人:呂經理
手機:13891481115
郵箱:3398339022@qq.com
地址:陜西省咸陽市秦都區西華路108號副3號

壓濾機專用泵該怎么維修保養

時間:2019-04-04 10:22:25 點擊:0

  1.定期更換新油,一般每隔2-3月更換一次就可以了;

 
 
  2.填進料密封以后,一定要定期檢查軸封水的泄漏量是多少,嚴密監視,若泄漏量超過規定的則視為泄漏嚴重,這時就應該及時調節填料壓蓋或換新的盤根,一定要保證外接水一滴一滴的泄漏;
 
  3.雙端面機械密封時,定期檢測水箱水位和水的渾濁程度,如果水位降低或者水比較渾濁,一定要立刻加水或換新干凈水;
 
  4.如果壓濾機泵在冬季長時間不使用,這時就需要關閉進口閥門,啟動泵,讓其空轉幾分鐘,排掉泵內殘余漿液,防止泵體發生凍裂現象;
 
  1. Regularly replace the new oil, usually every 2-3 months to replace it;
 
  2. After filling the material seal, be sure to check the leakage of the shaft seal water regularly and closely monitor it. If the leakage exceeds the specified value, it is considered to be a serious leak. At this time, the packing gland or the new one should be adjusted in time. Root, we must ensure that the leakage of external water drops one by one;
 
  3. When the double-face mechanical seal is used, the water level of the water tank and the turbidity of the water are regularly checked. If the water level is lowered or the water is turbid, it is necessary to add water or replace it with fresh water immediately;
 
  4. If the filter press pump is not used for a long time in winter, it is necessary to close the inlet valve, start the pump, let it idle for a few minutes, drain the residual slurry in the pump to prevent the pump body from freezing and cracking;
在線客服
聯系方式

熱線電話

13891481115

上班時間

周一到周五

公司電話

二維碼